BT169

A battery tester measures battery voltage and state of charge, so you can quickly tell whether a battery needs recharging or replacing.

Our battery meters cover common household and automotive batteries, including 1.5V, 9V and 12V types. Check the specifications for the supported range.

Yes, the 12V models are designed for car and motorcycle battery checks. They show the voltage and give a clear good, fair or recharge indication.

Very — you connect the test leads or place the battery in the slot, and the display shows the result immediately.

The BT-168 is our classic analog needle battery tester, while the BT-168D gives a digital readout for a clearer numeric result. Stock the BT-168 as the low-cost SKU for a budget retail line, and the BT-168D for customers who want to read the value directly. The HW171 and HW172 sit above both in the line if you need wider coverage, and the exact test ranges are on each product page.

For a hardware and home retail channel, the BT-168D is the model most buyers order, because the digital display is easy for end consumers to read. The BT-168 works well as a low-cost entry SKU alongside it. If you also supply electronics or tool shops, add the HW171 and HW172 so you can cover customers who need a wider test range.

Yes. As the CHINYOO factory in Wenzhou, we print your brand on the meter faceplate and the box for the BT-168, BT-168D, HW171 and HW172 under our OEM program. We can ship this line either in retail blister packs or in bulk cartons, so tell us your channel and we will confirm the packing spec. Send your artwork and we will verify the print area before you place the order.

Yes, all four models in our battery meter line comply with CE and RoHS, and the CHINYOO factory holds ISO certification. We can provide the test reports for the BT-168, BT-168D, HW171 and HW172 before you order. Ask your sales contact for the current reports.

A fully charged 12 V battery reads 12.65 V or above at rest. Below that, 12.45 V is roughly 75% charged, 12.24 V about 50%, 12.06 V about 25%, and 11.89 V or below is effectively flat. Measure across the battery terminals with the engine and all loads off, and let the battery stand before taking the reading.

Set the meter to DC volts on the 20 V range, put the red probe on the positive terminal and the black probe on the negative, and read the open-circuit voltage. That figure tells you the state of charge, not the capacity — a battery can show 12.6 V and still fail. Take the cranking reading as well, with the engine turning over.

A good resting voltage only proves the battery is charged, not that it can deliver cranking current. A battery with a broken internal connection or heavily sulphated plates can hold a surface charge and still collapse the moment the starter draws current. Watch the voltage during cranking: if it falls below about 9.6 V the battery is the problem, and if it holds, look at the starter circuit and the connections.

A voltage reading is enough to judge state of charge and it is the fastest check available. It cannot measure remaining capacity, so for a battery you suspect is failing under load you need either a load tester or the cranking-voltage test. Run both when a vehicle comes in with a no-start complaint and the resting voltage looks healthy.

Wir nehmen kleine Testbestellungen ebenso an wie Bestellungen in Containergröße. Nennen Sie uns Modelle und Mengen. Unser Vertrieb antwortet innerhalb von 24 Stunden mit Preisen und Lieferzeit.

Ja. Unser 2008 gegründetes Werk bietet individuelle Kennzeichnung, Verpackung und anpassbare Messbereiche. Senden Sie uns Ihre Spezifikationen.

Ja. Mit einem Muster können Sie Verarbeitung und Kalibrierung selbst prüfen. Der Expressversand dauert in der Regel 3 bis 7 Werktage. Die Musterkosten werden bei Ihrer ersten Großbestellung desselben Modells erstattet. Nennen Sie uns die Modelle per Kontaktformular oder E-Mail. Sie erhalten ein Angebot und wir versenden nach Zahlungseingang.