XT802

Il mesure la tension, le courant et la résistance. Les plages disponibles en alternatif et en continu dépendent du modèle.

Il convient à de nombreuses vérifications d’appareils et aux travaux de bricolage. Pour une mesure sur le secteur, vérifiez aussi que sa catégorie de mesure convient au point de mesure.

En tension continue, elle est généralement de 0,5 à 1 % selon le modèle. La fiche technique précise la valeur complète pour chaque calibre.

Oui. Envoyez à notre usine les références et les quantités souhaitées pour obtenir les tarifs de gros et les délais.

For a first order, stock the DT830 or A830L as the entry price point and the DT838 or DM101 as the step-up tier. That gives you two price bands without tying up container space in slow SKUs, and you can add DT832, DT858L or XT802 later based on sell-through. If you are not sure which band sells in your market, order both in roughly equal quantities and reorder from the data. Compare the full functions on each model's specifications table before you fix the mix.

Most distributors run two tiers for this line: the DT830, DT830L and A830L for hardware and home channels, and the DT838, DT850L or DT858L for trade and auto customers who pay up for the step-up model. You can keep a single SKU to simplify stock, but splitting the order lets you match price bands to each channel. Tell us your expected split by customer type and we will quote per-model pricing for the full order.

Yes, we are the factory in Wenzhou, so we can print your brand on the meter face, the dial and the box for the basic DMM line, including DT830, DT832, DT838, DM101 and the rest of the range. For retail we offer printed color boxes with a fitted insert; for cost-sensitive programs we ship bulk packs with a plain carton and your label applied. Send us the models and packaging you want and we will confirm print minimums and artwork lead time for each model.

Return the defective meters with your order number and we will repair or replace them at our Wenzhou factory, and we check the same production lot so you can keep the remaining stock on the shelf with confidence. For wholesale orders we process claims by lot and can credit the replacement value against your next order to save on return freight. The process covers the whole basic DMM line, from the DT830L to the XT803.

Most of our multimeters have a capacitance range, so you do not need a separate LCR meter for the everyday job of finding a failed capacitor. The XT802 covers 4 nF to 40 mF at ±10.8%, and the DT6222 covers 4 nF to 4 mF at ±3.5%. A bench LCR meter is still the better instrument if you need leakage, ESR or dissipation factor, because a multimeter only reports capacitance.

The printed figure is a nominal value carrying its own tolerance, commonly ±5% for film and ±20% for electrolytics, so a small difference is normal and not a meter fault. A reading far outside that band usually means the capacitor has drifted or dried out rather than that the instrument is wrong. Check the meter against a capacitor of known value before you act on a surprising result.

Discharge it, then lift at least one leg before measuring. In circuit, everything connected in parallel with the capacitor adds to the reading, and any discharge path makes the value drift while you watch it. With one leg lifted the reading settles within a second or two, and that is the number worth recording.

Most repair work sits between 1 nF and 1000 µF: film and ceramic parts in the low nanofarad region, electrolytics in the microfarad region. The DT6222 covers 4 nF to 4 mF on a 4000-count display, so small values still have useful resolution. The XT802 spans 4 nF to 40 mF if your work reaches the large electrolytics as well.

Nous acceptons aussi bien les petites commandes d’essai que les commandes par conteneur. Indiquez les modèles et les quantités souhaités. Notre équipe vous communiquera les prix et délais sous 24 heures.

Oui. Notre usine, fondée en 2008, propose des étiquettes et des emballages personnalisés ainsi que des plages de mesure adaptables. Envoyez-nous votre cahier des charges.

Oui. Un échantillon vous permet de vérifier la fabrication et l’étalonnage. La livraison express prend généralement 3 à 7 jours ouvrés. Le coût de l’échantillon est déduit de votre première commande en gros du même modèle. Indiquez les modèles par formulaire ou courriel. Nous établirons un devis et expédierons après paiement.