电池测试仪 L
Battery Meter
- Battery rated voltage: 1.5V
- Battery style: 1.5V AAA, AA, C, D; 9V (6F22, PP3, MN1604)
- Discriminant (1.5V): Good 1.28-1.5V / Weak 1.15-1.27V / Replace <1.14V
电池电量/电压检测仪，可快速区分好电池与弱电池。（型号 Battery Meter）
Key Features
- Battery rated voltage: 1.5V
- Battery style: 1.5V AAA, AA, C, D; 9V (6F22, PP3, MN1604)
- Discriminant (1.5V): Good 1.28-1.5V / Weak 1.15-1.27V / Replace <1.14V
- Discriminant (9V): Good 7.8-9V / Weak 6-7.7V / Replace <5.9V
- Dimension: 112×61×27mm
- Weight: 48g
- Operating conditions: 0-40℃, 25%-80%RH
Product Information
- Series
- 电池测试仪
- Model
- Battery Meter
- SKU
- Battery Meter
- Battery rated voltage
- 1.5V
- Battery style
- 1.5V AAA, AA, C, D; 9V (6F22, PP3, MN1604)
- Discriminant (1.5V)
- Good 1.28-1.5V / Weak 1.15-1.27V / Replace <1.14V
Specifications
| Function | Battery Meter |
|---|---|
| Battery rated voltage | 1.5V |
| Battery style | 1.5V AAA, AA, C, D; 9V (6F22, PP3, MN1604) |
| Discriminant (1.5V) | Good 1.28-1.5V / Weak 1.15-1.27V / Replace <1.14V |
| Discriminant (9V) | Good 7.8-9V / Weak 6-7.7V / Replace <5.9V |
| Dimension | 112×61×27mm |
| Weight | 48g |
| Operating conditions | 0-40℃, 25%-80%RH |
Application
This instrument is designed for electrical testing, installation and diagnostics across residential, commercial and industrial settings. Contact our team to discuss your specific application.
General Information
Product Details
FAQs
电池检测仪有什么作用？
电池检测仪可测量电池电压和剩余电量，让您快速判断电池是需要充电还是更换。
它可以检测哪些电池？
我们的电池检测仪覆盖常见的家用和车载电池，包括1.5V、9V和12V等类型。支持的检测范围请查看规格说明。
它能检测汽车电瓶吗？
可以的。12V型号专为汽车和摩托车电瓶检测而设计，可显示电压，并清晰提示“良好”“一般”或“需充电”。
电池检测仪使用方便吗？
非常方便——只需连接测试线或把电池放入插槽，显示屏立即显示检测结果。
首批订单在 BT-168 和 BT-168D 之间犹豫，两者有什么区别？各自适合什么时候备货？
BT-168 是我们经典的指针式电池测试仪，BT-168D 则是数显读数，数值结果更清晰。BT-168 作为平价零售线的低成本 SKU 备货，BT-168D 面向想直接读数值的客户。如果覆盖面要更广，系列中的 HW171 和 HW172 定位更高一档，具体测试范围在每个产品页上。
我们供货给五金和家装店，这个渠道该备哪款电池测试仪？
五金和家用零售渠道，BT-168D 是买家订购最多的型号，因为数显对终端消费者更容易读取。BT-168 可以作为旁边的低成本入门 SKU 搭配销售。如果还供货给电子或工具店，加上 HW171 和 HW172，就能覆盖需要更宽测试范围的客户。
能在电池测试仪上印我们的品牌，并用散装纸箱而不是零售吸塑包装发货吗？
可以。作为温州 CHINYOO 工厂，我们通过 OEM 项目为 BT-168、BT-168D、HW171 和 HW172 在表盘和包装盒上印刷你的品牌。这个系列可以走零售吸塑包装或散装纸箱，告诉我们你的渠道，我们会确认包装规格。把设计稿发给我们，下单前我们会核对印刷区域。
BT-168、BT-168D、HW171 和 HW172 有 CE 和 RoHS 认证吗？能提供测试报告吗？
有，我们电池测试仪系列的全部四个型号都符合 CE 和 RoHS，CHINYOO 工厂持有 ISO 认证。BT-168、BT-168D、HW171 和 HW172 的测试报告可以在下单前提供。请向你的销售对接人索取最新的报告。
What should a healthy 12 V car battery read with the engine off?
A fully charged 12 V battery reads 12.65 V or above at rest. Below that, 12.45 V is roughly 75% charged, 12.24 V about 50%, 12.06 V about 25%, and 11.89 V or below is effectively flat. Measure across the battery terminals with the engine and all loads off, and let the battery stand before taking the reading.
How do I check a car battery with a multimeter instead of a battery tester?
Set the meter to DC volts on the 20 V range, put the red probe on the positive terminal and the black probe on the negative, and read the open-circuit voltage. That figure tells you the state of charge, not the capacity — a battery can show 12.6 V and still fail. Take the cranking reading as well, with the engine turning over.
Why does my battery read 12.6 V but the car will not start?
A good resting voltage only proves the battery is charged, not that it can deliver cranking current. A battery with a broken internal connection or heavily sulphated plates can hold a surface charge and still collapse the moment the starter draws current. Watch the voltage during cranking: if it falls below about 9.6 V the battery is the problem, and if it holds, look at the starter circuit and the connections.
Do I need a load tester, or is a voltage reading enough?
A voltage reading is enough to judge state of charge and it is the fastest check available. It cannot measure remaining capacity, so for a battery you suspect is failing under load you need either a load tester or the cranking-voltage test. Run both when a vehicle comes in with a no-start complaint and the resting voltage looks healthy.
批发的最低起订量是多少？
我们既支持小批量试单，也承接整柜批发。请告知您需要的型号和数量，我们的销售团队将在24小时内回复报价和交期。
是否支持使用我们自有品牌的OEM/ODM定制？
支持的。我们是一家 2008 年创立的工厂，提供OEM/ODM服务，包括定制标签、包装和可调节测量量程。把您的规格要求发给我们，其余交给我们处理。
批量下单前能拿样品评估吗？
可以，我们鼓励在批量下单前先订样品，让你亲自确认做工和校准。样品走快递，一般 3 到 7 个工作日到货，样品费用会在同一型号的首个批量订单中抵扣返还。通过联系表单或邮件告诉我们需要的型号，我们报样品价，付款后即发货。
Related Products
