HW171 电池测试仪 L
HW171
- Product Type: Battery meter
- Display: Analogue GOOD / WEAK / POOR scale
- Supported Batteries: 9V, C, AA, AAA, N, button cell 1.55V
供零售商和批发商使用的电池状态筛选
Key Features
- Delivery form
Product Information
- Series
- 电池测试仪
- Model
- HW171
- SKU
- HW171
- Product Type
- Battery meter
- Display
- Analogue GOOD / WEAK / POOR scale
- Supported Batteries
- 9V, C, AA, AAA, N, button cell 1.55V
Specifications
| Function | HW171 |
|---|---|
| Product Type | Battery meter |
| Display | Analogue GOOD / WEAK / POOR scale |
| Supported Batteries | 9V, C, AA, AAA, N, button cell 1.55V |
| Packing | Blister card, 100pcs per carton |
| Inspection Standard | GB8218-2003 |
| Sampling Standard | GB8218-87 S-4 |
Application
This instrument is designed for electrical testing, installation and diagnostics across residential, commercial and industrial settings. Contact our team to discuss your specific application.
General Information
Packaging
Packing:blister card Packing quantity:100pcs/ctn Carton size: 68×36×28.5cm G.W.:10.2KGS N.W.:7.5KGS
Product Details
FAQs
电池检测仪有什么作用？
电池检测仪可测量电池电压和剩余电量，让您快速判断电池是需要充电还是更换。
它可以检测哪些电池？
我们的电池检测仪覆盖常见的家用和车载电池，包括1.5V、9V和12V等类型。支持的检测范围请查看规格说明。
它能检测汽车电瓶吗？
可以的。12V型号专为汽车和摩托车电瓶检测而设计，可显示电压，并清晰提示“良好”“一般”或“需充电”。
电池检测仪使用方便吗？
非常方便——只需连接测试线或把电池放入插槽，显示屏立即显示检测结果。
首批订单在 BT-168 和 BT-168D 之间犹豫，两者有什么区别？各自适合什么时候备货？
BT-168 是我们经典的指针式电池测试仪，BT-168D 则是数显读数，数值结果更清晰。BT-168 作为平价零售线的低成本 SKU 备货，BT-168D 面向想直接读数值的客户。如果覆盖面要更广，系列中的 HW171 和 HW172 定位更高一档，具体测试范围在每个产品页上。
我们供货给五金和家装店，这个渠道该备哪款电池测试仪？
五金和家用零售渠道，BT-168D 是买家订购最多的型号，因为数显对终端消费者更容易读取。BT-168 可以作为旁边的低成本入门 SKU 搭配销售。如果还供货给电子或工具店，加上 HW171 和 HW172，就能覆盖需要更宽测试范围的客户。
能在电池测试仪上印我们的品牌，并用散装纸箱而不是零售吸塑包装发货吗？
可以。作为温州 CHINYOO 工厂，我们通过 OEM 项目为 BT-168、BT-168D、HW171 和 HW172 在表盘和包装盒上印刷你的品牌。这个系列可以走零售吸塑包装或散装纸箱，告诉我们你的渠道，我们会确认包装规格。把设计稿发给我们，下单前我们会核对印刷区域。
BT-168、BT-168D、HW171 和 HW172 有 CE 和 RoHS 认证吗？能提供测试报告吗？
有，我们电池测试仪系列的全部四个型号都符合 CE 和 RoHS，CHINYOO 工厂持有 ISO 认证。BT-168、BT-168D、HW171 和 HW172 的测试报告可以在下单前提供。请向你的销售对接人索取最新的报告。
What should a healthy 12 V car battery read with the engine off?
A fully charged 12 V battery reads 12.65 V or above at rest. Below that, 12.45 V is roughly 75% charged, 12.24 V about 50%, 12.06 V about 25%, and 11.89 V or below is effectively flat. Measure across the battery terminals with the engine and all loads off, and let the battery stand before taking the reading.
How do I check a car battery with a multimeter instead of a battery tester?
Set the meter to DC volts on the 20 V range, put the red probe on the positive terminal and the black probe on the negative, and read the open-circuit voltage. That figure tells you the state of charge, not the capacity — a battery can show 12.6 V and still fail. Take the cranking reading as well, with the engine turning over.
Why does my battery read 12.6 V but the car will not start?
A good resting voltage only proves the battery is charged, not that it can deliver cranking current. A battery with a broken internal connection or heavily sulphated plates can hold a surface charge and still collapse the moment the starter draws current. Watch the voltage during cranking: if it falls below about 9.6 V the battery is the problem, and if it holds, look at the starter circuit and the connections.
Do I need a load tester, or is a voltage reading enough?
A voltage reading is enough to judge state of charge and it is the fastest check available. It cannot measure remaining capacity, so for a battery you suspect is failing under load you need either a load tester or the cranking-voltage test. Run both when a vehicle comes in with a no-start complaint and the resting voltage looks healthy.
批发的最低起订量是多少？
我们既支持小批量试单，也承接整柜批发。请告知您需要的型号和数量，我们的销售团队将在24小时内回复报价和交期。
是否支持使用我们自有品牌的OEM/ODM定制？
支持的。我们是一家 2008 年创立的工厂，提供OEM/ODM服务，包括定制标签、包装和可调节测量量程。把您的规格要求发给我们，其余交给我们处理。
批量下单前能拿样品评估吗？
可以，我们鼓励在批量下单前先订样品，让你亲自确认做工和校准。样品走快递，一般 3 到 7 个工作日到货，样品费用会在同一型号的首个批量订单中抵扣返还。通过联系表单或邮件告诉我们需要的型号，我们报样品价，付款后即发货。
Related Products
